Marabu, Textil Screen Printing set

1,025.00 Rs

Add to Cart

Marabu, Textil Screen Printing set

1,025.00 Rs 1,025.00 Rs 1025.0 MUR

1,025.00 Rs

This combination does not exist.

ADD TO CART

SKU:

N/A

Brand: Marabu

Shipping: 2-3 Days

Description

Marabu Textil Screen Printing set

1703000000082

Screen printing is a method of printing that involves forcing the printing ink through a finely woven mesh onto the fabric using a squeegee. You can use paper or cling film (cut to A5) to create the template. On the areas of the fabric where no ink is to be printed, according to the pattern, the openings of the mesh are made impermeable to ink using a paper stencil. Water-based, saliva-resistant, washable to 40 °C, and soft to the touch. For light-coloured fabrics free of finishes and fabric conditioners (max. 20 % synthetic fibre). After drying, fi x in the oven (150 °C/8 minutes), or iron for 3 minutes without steam. Stir paints before use and clean tools in water after use.

Contents: 1 x Textil Print 100 ml (Carbon black 974), 1 x screen (250 x 188 mm; 51T/130), 1 x squeegee (102 x 73 mm), 1 x painting knife, 1 x brochure

Screen printing set for fabric with printing ink and accessories
The set contains: 1 x Textil Print 100 ml (Carbon black 974), 1 x screen (250 x 188 mm; 51T/130), 1 x squeegee (102 x 73 mm), 1 x painting knife, 1 x brochure
Textil Print printing ink and Textil Aquarelle are waterbased, saliva-resistant, washable up to 40 °C and have a soft handle
You can use paper or transparent film (cut to DIN A5) for the template/stencil.
Set suitable for light-coloured, finish- and softener-free fabrics (max. 20 % synthetic)
After fixing (oven 8 Min./150 °C or 3 Min. ironing without steam) fabric is washable up to 40 °C

INSTRUCTIONS

HOW IT WORKS:

Screen printing:
1. Transfer the motif to the stencil material and then cut it out using the cutter.

2. There are two options for stencilling: a negative and a positive stencil. With a negative stencil, the lines and shapes of the motif are cut out. These areas will be white afterwards. The rest will be printed in colour. With a positive stencil, the lines and shapes of the motif remain and the other areas are removed.

3. Stick the stencil to the flat side of the screen using adhesive tape.

4. Position the screen on the side of the fabric to be printed. The flat side of the screen rests on the fabric. If letters are used, they should now be readable through the screen and not back-to-front. Apply a line of ink approximately 1 cm wide to the top edge of the screen.

5. Use the squeegee to spread the ink over the motif from top to bottom without pressure. Make sure all areas to be printed are covered in ink. The screen is flooded. Next, draw the squeegee over the motif from top to bottom applying even pressure. This transfers the ink to the fabric. Carefully lift the screen off the fabric. Re-flood the screen with ink after each process. When the printing process is complete, clean the Screen and stencil immediately and leave to dry.

6. After drying, fix the fabric in the oven (8 minutes / 150 °C) or iron without steam for 3 minutes. After fixing, the fabric is washable up to 40 °C.